Belt conveyors: KSHU-1000, KSHM-1200
Belt conveyors: KSHU-1000, KSHM-1200

UNDERGROUND DISTRICT CONVEYOR KSHU-1000

Designed for transportation of mined rock with lump size of potash ore, rock and coal of no more than 300 mm in underground mines and coal mines including gas-and-dust-hasardous ones. The conveyor can be used in workings with dip angles from minus 3 to plus 6º.
The conveyor can operate both as an independent transport unit and as a distribution chain of the mine.

The conveyor is rated for 660 V voltage and alternating current frequency of 50 Hz. The conveyor can be rated for another voltage against order of a customer.

The conveyor consists of the following main assembly units and components: boom, drum unit, drive unit, middle part (rope line) of the conveyor, tension station, coupling section. The conveyor embodiment makes it possible to install and connect UKPS unit (fire alarm), KSL sensors (belt running-off control) and KTV (cable – rope switch)

KSHU1000 overall view

SPECIFICATIONS

Main parameters and dimensions Standard
Receiving capacity, m3/min, min 16,5
Travel speed of a belt, m/s 2,5
Belt width, mm1000
Drive power, kW 2x75
Driving drums diameter with lining, mm 1030
Rolls diameter, mm 127
- Electric installation version
mining explosion-proof
- Mass of delivery set (without belt), kg
from 30800 to 61400
Conveyor length, m от 150 до 600
The conveyor is equipped with:
  • reducing gears of JSC “KMBP” manufacture
  • rolls of JSC “KMBP” manufacture
  • controlling complete device thyristor explosion-proof UKTB-1-400 manufactured by close JSC “Makeevsky zavod shakhtnoi avtomatiki”

KSHM1200 UNDERGROUND TRUNK CONVEYOR

Designed for transportation of mined rock with lump size of potash ore, rock and coal of up to 500 mm with separate swells of no more than 300 mm in underground mines and coal mines including gas-and-dust-hasardous ones. The conveyor can be used in workings with dip angles from minus 3 to plus 18º.
The conveyor can operate both as an independent transport unit and as a distribution chain of the mine.
The conveyor is rated for 660 V voltage and alternating current frequency of 50 Hz. The conveyor can be rated for another voltage against order of a customer.

The conveyor consists of the following main assembly units and components: power-drive station, tension tracking station, transition section, linear section, scraper section, flying bridge section. The conveyor embodiment makes it possible to install and connect UKPS unit (fire alarm), KSL sensors (belt running-off control) and KTV (cable – rope switch)

KSHM1200 overall view

SPECIFICATIONS

Main parameters and dimensions Standard
Receiving capacity, m3/min, min 29,4
Belt travel speed, m/s 2,5
Width of a belt, mm 1200
Drive power, kW 500 (2х250)
Driving drum diameter, with lining, mm 824
Rolls diameter 159
Electric installation version Mining explosion-proof
Mass of delivery set (without belt), kg 180970
Length of conveyor, m 1000
Back to the section