MODULAR BELT LOADER FOR HEADING MACHINES PPM800

PPM800 belt loader is designed for transportation of mined rock from a road header or similar mining machine, working separately or as a member of the heading set of equipment while heading of the horizontal or inclined mine workings from -18°up to +18°. Utilizing this belt loader by inclination from plus/minus 18° up to plus/minus 25° requires an application of the hydraulic brakes. The belt loader can be utilized in gas- and dust-hazardous mines; by building of the underground constructions and mining of nonmetallic minerals.

The feeding belt loader is fixed on one end on the machine, and with another one on the main belt loader. Movement of the belt loader is provided over the monorail sections, suspended to the roof. If desired, design with stationary installation on the sole is available.

Description of main parameters and dimensions
Value
Capacity, t/h, min
820
Maximum length, m
115
Main belt loader length, m
105
Feeding belt loader length, m
10
Belt width, mm
800
Total drives power, kW
75
Main belt loader power, kW
2х30
Feeding belt loader power, kW
15
Belt travel speed, m/s,min
2,5
Gear box type
cylindrical
Rolls diameter, mm
108
Belt loader allowable mass, t, max
25

Back to the section