1GPKS-00 / 1GPKS-05 road header designed for driving of horizontal and inclined workings with dip angle of +12°.
1GPKS-01 / 1GPKS-06 – the header completed with the belt loader of wheel type, designed for driving of horizontal and inclined workings with dip angle of up to +12°.
1GPKS-02 / 1GPKS-07 – the header equipped with a retaining unit for holding the header on the slopes, designed for driving of horizontal and inclined workings with dip angle of up to plus +12° (to the rise).
1GPKS-03 / 1GPKS-08 – the header equipped with retaining unit for holding the header on the slopes, designed for driving of horizontal and inclined workings with dip angle of up to minus 25° (to the dip).
1GPKS-04 / 1GPKS-09 – the header completed with the belt loader of bridge type, designed for driving of horizontal and inclined workings with dip angle of +12°.
1GPKS-00 – 1GPKS-04 – hand control version
1GPKS-00 – 1GPKS-09 – remote control version
SPECIFICATIONS
| Characteristic name | 1GPKS-00, 1GPKS-05 | 1GPKS-01,1GPKS-06 | 1GPKS-02,1GPKS-07 | 1GPKS-03, 1GPKS-08 | 1GPKS-04,1GPKS-09 |
|---|---|---|---|---|---|
| Rated capacity not less than: in coal and rock σ compr. ≤ 20 MPa m3/min | 1,42 | 1,42 | 1,42 | 0,44 | 1,42 |
| in rock with hardness σ compr.=70 MPa, m3/min |
|
||||
| 0,26 | 0,26 | 0,26 | 0,1 | 0,26 | |
| upper limit of ultimate strength of broken rocks, MPa | 70 | ||||
| Form of working section | any, except round | ||||
| Section of workings, m2 | 7-17 | ||||
| Size of working in the rough: |
|
||||
| Height, m | 2,3-4,05 | ||||
| width, m (from one unit) | 2,6-4,7 | ||||
| Overall dimensions in transport position, mm, max |
|
||||
| length | 10500 | 10500 | 10500 | 10500 | 10500 |
| width | 2000 | 2000 | 2000 | 2000 | 2000 |
| width over drums of a traction safety device | - | - | 2230 | 2230 | - |
| height | 2100 | 2100 | 2100 | 2100 | 2100 |
| Mass of machine, t | 26 | 26 | 27 | 28 | 26 |
| Mass of loader, t |
|
2,45 |
|
|
2,85 |
| Operating member | telescopic boom with longitudinally- axial bit | ||||
| Electromotor power, kW | 55 | ||||
| cutting tool | PS1-12 | ||||
| Size of telescopic separation, mm, min | 500 | ||||
| Loading unit | feeder with gathering arms or sprockets | ||||
| Width of feeder table, mm | 3020 | ||||
| undercarriage | hydraulic drive | ||||
| Travel speed, m/min | 2,6; 4 | ||||
| Width of crawler tracks, mm | 380 | ||||
| Clearance, mm | 150 | ||||
| Specific floor pressure, MPa, max | 0,09 | ||||
| Hydraulic pressure, MPa | 16 | ||||
| Electric installation | flameproof | ||||
| Power supply voltage, V | 660 or 1140 | ||||
| Total motors’ power, kW | 100,5 | ||||
| Dust suppression system | with water supply to a breakage area | ||||
